Dates & calendar

Timer and Stopwatch

Set a timer that rings when time is up, or time something with a stopwatch and record laps.

00:00:00

This tool runs entirely inside your browser. No file or text is sent to any server.

How to use

  1. Choose “Timer” or “Stopwatch” at the top of the tool.
  2. For the timer, type the hours, minutes and seconds, or press one of the quick times, then press the “Start” button. The “Pause” button holds the timer and the “Resume” button carries on from the same place.
  3. When the timer’s countdown is over, the alarm sound plays. To silence it, press the “Stop the alarm” button.
  4. For the stopwatch, press “Start”, and press “Lap” whenever you want the time of a lap written down. Press the “Copy” button to take the list of laps.

Notes on this tool

The timer accepts up to 99 hours, 59 minutes and 59 seconds. If you type, say, 90 minutes, it counts that as 1 hour 30 minutes. “Reset” stops the timer and puts it back to the time you typed.

The time left is also written next to the page name at the top of the browser, so you can leave this page open, get on with something else and glance at it whenever you like.

The alarm sound plays for the length of time you choose (3 to 30 seconds) and then stops by itself. If you do not want a sound, turn off “Play a sound when time is up”; then only the words “Time is up!” and the page name tell you.

The stopwatch shows hundredths of a second and records up to 999 laps. The timer and the stopwatch can run at the same time, and switching from one to the other stops neither.

Nothing is stored or sent, and everything happens in your own browser. Closing the page or reloading it puts everything back to the site’s default state.

Frequently asked questions

Does the timer keep working if I close the page or my phone screen turns off?
Closing or reloading the page ends the timer. If the page stays open and you get on with something else, it keeps running. When a phone screen turns off, the browser may pause this page and the alarm may come late; so if you see “Keep the screen on” under the tool, leave it switched on; it stops the screen from turning off by itself, but if you turn the screen off yourself with the phone button, “Keep the screen on” no longer has any effect. When you come back to the page, the time left is shown correctly.
Why did the alarm not make a sound?
First make sure “Play a sound when time is up” is on, and press “Test sound”. If you hear nothing, check the volume and speaker of your device; on some phones silent mode also blocks the sound. If the sound did play but the alarm was too short for you to notice, increase “Alarm length”. A browser only allows sound after you have done something on this page, such as pressing “Start”.
How accurate are the timer and the stopwatch?
Time is read from your device’s clock rather than counted second by second, so it does not fall behind as time goes on. That is accurate enough for everyday things like cooking, studying and exercise, but not for an official race record. If you change the device clock in the middle, the time moves with it.
What is the difference between “Lap time” and “Total time” on the stopwatch?
Lap time is the gap between two presses of “Lap”, and total time runs from “Start” up to that lap. For example, if the first lap takes one minute and the second one minute and thirty seconds, the total time at the second lap is two minutes and thirty seconds.
How do I set the timer again and again for study or work?
After the alarm, “Start again” counts the same time from the beginning. For a different time, such as a break, press one of the quick times or type a new number and press “Start”. The tool does not build a cycle by itself; you start each round yourself.

Related tools

Date difference & day counter

How many days lie between two dates, and what date falls a number of days before or after another.

Dates & calendar

Age calculator

Your exact age in years, months and days, from a Persian or Gregorian date of birth.

Dates & calendar